Wolf-Eyes P7-M90 LED Gebrauchtware

Artikelnummer: WEP7M90

Kategorie: Wolf-Eyes

89,90 €

inkl. 19% USt. , zzgl. Versand (Standard)

sofort verfügbar

Lieferzeit: 1 - 3 Werktage


Gebrauchtware aus Reparatur. Neuwertig. Minimale Gebrauchsspuren.

Standard components:
- 1 x D52- P7 Digital Concealed 2 mode LED-lamp assembly 6.0V-13.0V
- 1 x P7-M90 Bezel
- 1 x M90-A- tactical button switch tail cap
- 1 x M90 Rattlesnake Body
- 1 X gift box

Please note that P7-M90 bezel is compatible with wolf-eyes M90 series flashlights.

- Features a Seoul Semiconductors SSC P7 LED Emitter
- Up to 640 lumens of brightness when powered by 2 x LRB168A battery
- 2 modes function:
Default mode: Maximum brightness (100%) -> 30% brightness ->lowest brightness (2%)
Concealed mode: Strobe -> SOS-> Beacon signal
- P7-M90 bezel is compatible with wolf-eyes M90 series flashlight
- Aerospace-grade Aluminum body, HA III Military grade hardanodized in black
- Waterproof: IPX-8 standard

Brightness:640Lumens (full brightness stage)
Runtime: full brightness stage: about 95 minutes with regulated output
Body:Aerospace grade aluminum construction.
Reflector: High temperature processed, layers of alloy coating films.
Finish: HA III Military grade
Lamp: SSC P7 LED Lamp Assembly 6.0-13.0V.
Switch: Rapid switch between Morse-on and lock-on with over 50,000 times life cycle.
O-ring sealed:Splash proof
Beam: flood beam with good combination of throw
Weight without battery: 330g
Length: 235mm
Body diameter: 25.4mm
Head diameter: 59.4mm
Operation Temperature: -25°-60°
Color: Tactical black
Package: gift box

Digital LED instruction:
-Soft press till the light comes on 100%, then further pressing the switch will activate default mode functions, according to the sequence of “maximum brightness (100% brightness) -> 30% brightness -> 2% brightness”. When you have reached the desired level, press the switch fully to keep the light on at that level.
-When switch on/off for 7 times in Default mode, the light will turn into concealed mode, according to the sequence of “Strobe -> SOS-> Beacon signal”.
-After switched off the flashlight for 2 seconds, the default settings resume, and the lamp will enter full brightness when being switched on again.